Filter
Top Products
Chapter 10. ACLs | 169
ProSafe M4100 and M7100 Managed Switches
b. Under Binding Configuration, make the following selection and enter the following
information:
• In he ACL ID field, select 101.
• In the Sequence Number field, enter 1.
c. Click Unit 1.
The ports display.
d. Click the gray box under port 48.
A check mark displays in the box.
e. Click Apply to save the settings.
13. Apply
ACL 103 to port 24 and port 48:
a. Select Security >
ACL > Advanced > IP Binding Configuration.
A screen similar to the following displays.
b. Under Binding Configuration, make the following selection and enter the following
information:
• In the ACL ID field, select 103.
• In the Sequence Number field, enter 2.
c. Click Unit 1.
The ports display.
Configure the following ports:
• Click the gray box under port 24.
A check mark displays in the box.
• Click the gray box under port 48.
A check mark displays in the box.
d. Click Apply to save the settings.
Set up a MAC ACL with Two Rules
The example is shown as CLI commands and as a Web interface procedure.