Filter
Top Products
334 | Chapter 17. Tools
ProSafe M4100 and M7100 Managed Switches
A screen similar to the following displays.
b. Under Dual Image Configuration, scroll down and select the Image 2 check box. The
image2 now appears in the Image name field at the top.
c. In the Active Image field, select TRUE.
d. Click Apply.
Outbound Telnet
In this section, the following examples are provided:
• CLI: show network on page 335
• CLI: transport output telnet on page 336
• Web Interface: Configure Telnet on page 336
• CLI: Configure the session-limit and session-timeout on page 337
• Web Interface: Configure the Session Timeout on page 337
Outbound Telnet:
• Establishes an outbound
Telnet connection between a device and a remote host.
• A
Telnet connection is initiated, each side of the connection is assumed to originate and
terminate at a network virtual terminal (NVT).
• Server and user hosts do not maintain information about the characteristics of each
other
’s terminals and terminal handling conventions.
• Must use a valid IP address.