Filter
Top Products
Chapter 15. Security Management | 301
ProSafe M4100 and M7100 Managed Switches
A screen similar to the following displays.
b. Select the check box for Interface 1/0/1.
c. For Interface 1/0/1, set the
Trust Mode as Enable.
d. Click Apply.
A screen similar to the following displays.
4. View the DHCP Snooping Binding table.
a. Select Security > Control > DHCP Snooping Binding Configuration.
A screen similar to the following displays.
5. Enable ARP Inspection in VLAN 1.
a. Select Security > Control > Dynamic
ARP Inspection > DAI VLAN Configuration.