Filter
Top Products
252 | Chapter 13. IGMP Snooping and Querier
ProSafe M4100 and M7100 Managed Switches
address in querier packets. See the Command Line Reference for more details about other
IGMP querier command options.
(Netgear switch) #vlan database
(Netgear switch) (vlan)#set igmp 1
(Netgear switch) (vlan)#set igmp querier 1
(Netgear switch) (vlan)#exit
(Netgear switch) #config
(Netgear switch) (config)#set igmp querier
(Netgear switch) (config)#set igmp querier address 10.10.10.1
(Netgear switch) (config)#exit
Web Interface: Enable IGMP Querier
1. Select Switching > Multicast > IGMP VLAN Configuration.
A screen similar to the following displays.
2. Enable IGMP snooping on VLAN 1.
a. Select Switching > Multicast > IGMP Snooping > IGMP VLAN Configuration.
A screen similar to the following displays.
b. Enter the following information:
• In the VLAN ID field, enter 1.