Filter
Top Products
396 | Chapter 23. DHCPv6 Server
ProSafe M4100 and M7100 Managed Switches
c. In the IPv6 Mode field, select Enable.
d. In the Routing Mode field, select Enable.
e. In the
Adv Other Config Flag field, select Enable.
f. Click Apply to save the settings.
3. Configure IPv6 address on the interface 2/0/21.
a. Select Routing > IPv6 >
Advanced > Prefix Configuration.
A screen similar to the following displays:
b. In the Interface list, select 1/0/21.
c. In the IPv6 Prefix field, enter 2003:1000::1.
d. In the Length field, enter 64.
e. In the EUI64 field, select Disable.
f. Click Add.
4. Enable DHCPv6 service.
a. Select System > Services > DHCPv6 Server > DHCPv6 Server Configuration.
A screen similar to the following displays:
b. For Admin Mode, Select the Enable radio button.
c. Click Apply.
5. Create DHCPv6 pool.
a. Select System > Services > DHCP Server > DHCPv6 Pool Configuration.