NETGEAR M4100 Switch User Manual


 
526 | Chapter 31. DVMRP
ProSafe M4100 and M7100 Managed Switches
3. Enable DVMRP protocol on the switch.
(Netgear Switch) (Config)#ip dvmrp
4. Enable DVMRP mode on the interfaces 1/0/1, 1/0/13, and 1/0/21.
(Netgear Switch) (Config)#interface 1/0/1
(Netgear Switch) (Interface 1/0/1)#ip dvmrp
(Netgear Switch) (Interface 1/0/1)#exit
(Netgear Switch) (Config)#interface 1/0/13
(Netgear Switch) (Interface 1/0/13)#ip dvmrp
(Netgear Switch) (Interface 1/0/13)#exit
(Netgear Switch) (Config)#interface 1/0/21
(Netgear Switch) (Interface 1/0/21)#ip dvmrp
(Netgear Switch) (Interface 1/0/21)#exit
(Netgear Switch) #show ip dvmrp neighbor
Interface ..................................... 1/0/13
Neighbor IP Address ........................... 192.168.2.2
State ......................................... Active
Up Time (hh:mm:ss) ............................ 00:02:40
Expiry Time (hh:mm:ss) ........................ 00:00:25
Generation ID ................................. 1116347719
Major Version ................................. 3
Minor Version ................................. 255
Capabilities .................................. Prune GenID Missing 11441
Received Routes ............................... 0
Received Bad Packets .......................... 0
Received Bad Routes ........................... 0
Interface ..................................... 1/0/21
Neighbor IP Address ........................... 192.168.3.1
State ......................................... Active
Up Time (hh:mm:ss) ............................ 00:01:44
Expiry Time (hh:mm:ss) ........................ 00:00:28
Generation ID ................................. 1116595047
Major Version ................................. 3
Minor Version ................................. 255
More Entries or quit(q)
Capabilities .................................. Prune GenID Missing 11441
Received Routes ............................... 0
Received Bad Packets .......................... 0
Received Bad Routes ........................... 0