Filter
Top Products
--------------------------------------------------------------------
unit image1 image2 current-active next-active
--------------------------------------------------------------------
1 5.11.2.51 8.0.0.2 image1 image1
(Netgear Switch) #boot system image2
Activating image image2 ..
(Netgear Switch) #show bootvar
Image Descriptions
image1 : default image
image2 :
Images currently available on Flash
--------------------------------------------------------------------
unit image1 image2 current-active next-active
--------------------------------------------------------------------
1 5.11.2.51 8.0.0.2 image1 image2
Image2 will be executed after reboot.
Chapter 17. Tools | 333
ProSafe M4100 and M7100 Managed Switches
Web Interface: Download a Backup Image and Make It Active
1. Download a backup image using tftp.
a. Select Maintenance > Download > File Download.
A screen similar to the following displays.
b. In the File Type list, select Archive.
c. In the Image Name list, select image2.
d. In the T
ransfer Mode list, select TFTP.
e. In the Server Address
Type list, select IPv4.
f. In the Server Address field, enter 10.100.5.17(tftp server IP address).
g. In the Remote File Name, enter gsm73xxse-r8v0m0b3.stk.
h. Click Apply.
2. Activate image2.
a. Select Maintenance > File Management > Dual Image Configuration.