Filter
Top Products
358 | Chapter 19. Switch Stacks
ProSafe M4100 and M7100 Managed Switches
a. Select Maintenance > Reset > Device Reboot. A screen similar to the following
displays.
b. In the Reboot Unit No. list, select 2.
c. Click Apply.
3. On Switch B, configure a stack port as an Ethernet port
a. Select System > Stacking >
Advanced > Stack Port Configuration. A screen
similar to the following displays.
b. Under Stack Port Configuration, scroll down and select the 1/0/51 check box.
c. In the Configured Stack Mode list, select Ethernet.
d. Click Apply to save the settings.
4. Reboot the switch.
a. Select Maintenance > Reset > Device Reboot.
A screen similar to the following
displays.
b. In the Reboot Unit No. list, select 1 .
c. Click Apply.