Filter
Top Products
246 | Chapter 13. IGMP Snooping and Querier
ProSafe M4100 and M7100 Managed Switches
IGMP Snooping
The following are examples of the commands used in the IGMP snooping feature.
CLI: Enable IGMP Snooping
The following example shows how to enable IGMP snooping.
(Netgear Switch) #config
(Netgear Switch) (Config)#set igmp
(Netgear Switch) (Config)# set igmp unknown-multicast filter
(Netgear Switch) (Config)#exit
Web Interface: Enable IGMP Snooping
1. Configure IGMP snooping:
a. Select Switching > Multicast > IGMP Snooping Configuration.
A screen similar to the following displays.
b. For Admin Mode select the Enable radio button.
c. For Unknown Multicast Filtering, select the Enable radio button.
d. Click Apply.
Show igmpsnooping
The example is shown as CLI commands and as a Web interface procedure.