NETGEAR RP114 Network Router User Manual


 
Reference Guide for the Model RP114 Web Safe Router
1-2 Introduction
Powerful packet filtering capabilities
Incoming port forwarding and DMZ for specific services
Built in 4-port 10/100 Mbps Switch
Allows LAN connections at 10 megabits per second (Mbps) or 100 Mbps
Autosensing for Ethernet (10BASE-T) or Fast Ethernet (100BASE-Tx) transmissions
Auto Uplink
TM
(autosensing MDI/MDIX) configures each port for normal or uplink
connection
Half-duplex or full-duplex operation
Ethernet connection to a wide area network (WAN) device, such as a cable modem or DSL
modem
RJ-45 interface allowing connection to a 10BASE-T device
Protocol Support
–IProuting
Dynamic extended Network Address Translation (NAT+) with port forwarding for
operation with a single static or dynamic IP address
Dynamic Host Configuration Protocol (DHCP) server for dynamically assigning
network configuration information to PCs on the LAN
DHCP client for dynamically obtaining configuration information from the Internet
Service Provider (ISP)
DNS Proxy for simplified configuration
PPP over Ethernet (PPPoE) support
Login capability
Automatically executes user login for
RoadRunner cable modem service,
PPP over Ethernet accounts, PPTP login (for European service providers)
BigPond service (for Telstra Australia)
Easy installation and management
Easy, web-based setup for configuration of most features
Built-in Manager interface for configuration of advanced features, accessible by
Telnet Protocol