NETGEAR RP114 Network Router User Manual


 
Reference Guide for the Model RP114 Web Safe Router
4-4 Basic Configuration of the Router
8.
ClickonNexttogototheISPParametersscreen,showninFigure 4-4 below:
Figure 4-4. Browser-based Setup Wizard, second screen
This screen determines whether a login program will be run.
a.
If your service provider does not require a login program, leave Encapsulation as Ethernet
and proceed to Step 9.
b.
If your service provider uses PPP over Ethernet (PPPoE), select Encapsulation as PPPoE,
and enter these additional parameters:
If your connection supports multiple ISPs, enter the Service Name of the one you use.
Otherwise leave Service Name blank.
Enter the PPPoE login user name and password provided by your ISP. These fields are
case sensitive.
If you wish to change the login timeout, enter a new value in seconds.
ProceedtoStep9.
c.
(Europe) If your service provider uses Alcatel's ANT (ADSL Network Termination) with
PPTP as a login method, select Encapsulation as PPTP, and enter these additional
parameters:
Enter the PPTP login user name and password provided by your ISP. These fields are
case sensitive.
If you wish to change the login timeout, enter a new value in seconds.