Filter
Top Products
Reference Guide for the Model RP114 Web Safe Router
Maintenance 6-5
Note: When uploading software to the Model RP114 router, it is important not to interrupt the
Web browser by closing the window, clicking a link, or loading a new page. If the browser is
interrupted, it may corrupt the software. When the upload is complete, your router will
automatically restart.
In some cases, you may need to reconfigure the router after upgrading.
Configuration File Management
The configuration settings of the Model RP114 router are stored within the router in a
configuration file. This file can be saved (backed up) to a user’s PC, retrieved (restored) from the
user’s PC, or cleared to factory default settings.
To manage the configuration file, click on Maintenance in the Main Menu of the browser interface,
then select Files. Three submenu tabs are available, and are described in the following sections.
Restore and Backup the Configuration
The Restore and Backup tabs in the Maintenance Files menu allow you to save and retrieve a file
containing your router’s configuration settings.
To save your settings, select the Backup tab. Click the Backup button. Your browser will extract
the configuration file, named‘rom-0’, from the router and will prompt you for a location on your
PC to store the file.
To restore your settings, select the Restore tab. Enter the full path to the configuration file on your
PC or click the Browse button to browse to the file. When you have located it, click on the Upload
button to send the file to the router. The router will then reboot automatically.
Erase the Configuration
It is sometimes desirable to restore the router to a known blank condition. This can be done by
using the Erase function, which will restore all factory settings. After an erase, the router's
password will be 1234, the LAN IP address will be 192.168.0.1, and the router's DHCP client will
be enabled.
To erase the configuration, click the Erase tab, then click the Erase button on the screen.