Filter
Top Products
Reference Guide for the Model RP114 Web Safe Router
7-2 Using the Manager Interface for Initial Router Configuration
OR
• Add a route to the static routing table of the workstation to indicate that the router can be
reached through the local LAN port.
To access the router by Telnet from a Windows PC:
1.
From the Windows toolbar, select Start.
2.
Select Run...
3.
In the Open field, type:
telnet 192.168.0.1
4.
Click on OK.
The router should respond with a “Password:” prompt. Type the current password to access the
Manager interface. The default password is 1234.
.When using Telnet, consider the following restrictions:
• Single administrator
To prevent confusion and discrepancy on the configuration, the router allows only one Telnet
connection at any time.
• System timeout
When you are connected to the router through Telnet, there is a system timeout of 5 minutes
(300 seconds). If you are not configuring the device and leave it inactive for this timeout
period, the router automatically disconnects from the Telnet session. An exception is made for
Menu 24.1, which displays current status and statistics. This menu will not time out.