Filter
Top Products
Setting Up Windows Components
RFM-4002-5015 Rev 3
37
Windows 95/98/ME
1 From your desktop, double-click the My Computer icon to
open the My Computer window.
2 Double-click the Control Panel icon to open the Control
Panel window.
3 Double-click the Network icon to open the Network
window.
4 Scroll down the list to find TCP/IP Dial-Up Adapter.
• If you see TCP/IP
Dial-Up Adapter in the list, click
OK; you have TCP/IP installed and can proceed with
installation.
• If you do not see TCP/IP
Dial-Up Adapter in the
list, you will need to add the TCP/IP protocol. Click
Add and proceed with the remaining instructions.
5 The Select Network Component Type window opens.
Highlight Protocol and then click Add.
6 The Select Network Protocol window opens. Under
Manufacturer, select Microsoft. Under Network
Protocol, select TCP/IP. Click OK.
7 The TCP/IP Dial-Up Adapter appears in the list.
• If the Dial-Up Adapter appears in the Network
Adapters list, it is installed. You may proceed with
installation.
• If the Dial-Up Adapter does not appear in the
Network Adapters list, you do not have a Dial-Up
Adapter installed. Refer to page 38 for instructions for
installing Dial-Up adapter.
8 Click OK to close the Select Network Protocol window.