Filter
Top Products
Manual Modem Configuration
RFM-4002-5015 Rev 3
41
Manual Modem Configuration
In this chapter, you will learn how to manually add a modem, configure the
modem drivers and create a dial-up networking connection for Nextel.
NOTE: Use these instructions only if you did not previously install the
iDEN
Packet Data Applet.
This chapter includes:
Modem Configuration – Windows 95/98/ME Page 41
Modem Configuration – Windows NT 4.0 Page 44
Modem Configuration – Windows 2000 Page 48
Modem Configuration – Windows 95/98/ME
Install the Modem
1 Go to Start
Settings
Control Panel and click on the
Modems icon.
2 The Modem Properties window opens. Select the General
tab and click Add.
3 The Install New Modem window opens. Select Other.
Click Next.
4 The Install New Modem/Hardware Installation window
opens. Check the Don’t run the Hardware Installation
Wizard box. Click Next.
NOTE: If this option is not available, proceed to the next step.
5
The
Install New Modem/Modem Detection
window
opens. Check the Don’t detect my modem; I will select