Filter
Top Products
Modem Profiles and Settings
RFM-4002-5015 Rev 3
63
IMPORTANT: These settings are stored on the modem’s Random
Access Memory (RAM) and are lost when the modem is turned off
unless stored in the modem’s non-volatile memory.
The iR1200 modem can store up to three profile or image. By default, image 2
is loaded when the modem is powered on. We recommend that you save this
setting to the first profile/image.
AT Command Save User Default
Configuration
Command Syntax AT&W1
Expected Return Code(s) OK
GPS Default Parameters
The iR1200 GPS-Enabled modem will use the following NMEA default
parameters.
The factory default port characteristics are:
• Baud rate = 4800 bps
• Data bits = 8
• Stop bits = 1
• Parity = None
Note: These settings should not be changed unless absolutely
necessary.