Filter
Top Products
iR1200 Modem
46 nextel.com
occur and Windows NT will not recognize the Standard 19200
bps modem.
12 The Add RAS Device window opens. Make sure the proper
COM port for your modem connection is selected. Click
OK.
13 The Remote Access Setup window now shows the added
COM port. Click Continue.
14 The system automatically configures the appropriate
settings.
15 Continue with the steps to Configure the Modem Driver.
Configure the Modem Driver
1 From the Modems Properties window, select the
Standard 19200 bps Modem. Click Properties.
2 The Standard 19200 bps Modems Properties window
opens. On the General tab, confirm the Maximum Speed
is 19200 bps.
3 Click the Connection tab and verify the following settings:
• Data Bits: 8
• Parity: None
• Stop Bits: 1
Click Advanced.
4 The Advanced Connection Settings window opens. If they
are not selected already, select the following:
• Use Flow Control and
• Hardware (RTS/CTS)
• If the Duplex option is present, select Full.