Filter
Top Products
iR1200 Modem
76 nextel.com
DCE_by_
DTE
Parameter
Values:
0 = No flow control was set by DTE.
1 = XON/XOFF; do not pass XON/XOFF characters to
the remote DCE.
2 = RFR active/inactive flow control
3 = XON/XOFF; Pass DC1/DC3 characters to the
remote DCE in addition to acting upon local flow
control.
DTE_by_
DCE
Parameter
Values:
0 = No flow control was set by DTE.
1 = XON/XOFF flow control
2 = CTS/RFS active/inactive flow control
Local Data Rate
This numeric extended-format parameter specifies the data rate between the
DTE and the DCE.
Command +IPR
Action AT+ipr=<rate>
Query AT+ipr?
Range AT+ipr=??
Parameter
Values:
0 = Automatic detection on baud rate, data framing
300 = Transmission speed in bits per second.
2400 = Transmission speed in bits per second.
4800 = Transmission speed in bits per second.
9600 = Transmission speed in bits per second.
19200 = Transmission speed in bits per second.