Filter
Top Products
iR1200 Modem
38 nextel.com
Windows NT/2000
In most cases the TCP/IP protocol was installed automatically. However, for
Windows NT and 2000, TCP/IP may not have been included in the standard
installation. The following steps describe how to check that TCP/IP is in fact
installed, and if necessary add the TCP/IP protocol.
NOTE: This may require that you contact your IT Representative or
System Administrator.
1 From your desktop, select Start
Settings
Network and
Dialup Connections
Local Area Connection. The Local
Area Connection window opens.
2 Click the Properties button on the Local Area Connection
window.
3 Is the Internet Protocol listed under the Components
listing?
4 If the Internet Protocol is not listed, click the Install
button. The Select Network Component Type window
opens.
5 Under Network Component Type listing, highlight
Protocol and click Add.
6 The Select Network Protocol window opens. Under
Network Protocol listing, highlight Internet Protocol and
click OK.
7 The installation will now begin — if prompted do NOT
restart.