Filter
Top Products
Configuring the domain 107
/cfg/domain #/httpredir
followed by:
ena
Enables traffic logging with syslog messages to the
specified syslog server.
Traffic logging with syslog messages is disabled
by default.
dis
Disables traffic logging with syslog messages.
Traffic logging with syslog messages is disabled
by default.
Configuring HTTP redirect
You can configure the Nortel SNAS domain to automatically redirect HTTP
requests to the HTTPS server. For example, a client request directed to
http://nsnas.com is automatically redirected to https://nsnas.com.
To configure the domain to automatically redirect HTTP requests to the
HTTPS server specified for the domain, use the following command:
/cfg/domain #/httpredir
The Http Redir menu appears.
The Http Redir menu includes the following options:
Table 9
Configuring HTTP redirect
/cfg/domain #/httpredir
followed by:
port <port> Specifies the port to which the portal server
listens for HTTP communications.
• port is an integer that indicates the TCP
port number. The default is 80.
ATTENTION
If you do not accept the default value
and you specify a different port, you must
modify the Red and Yellow filters on the
network access devices accordingly.
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100 03.01 Standard
28 July 2008
Copyright © 2007, 2008 Nortel Networks
.