Filter
Top Products
Configuring the cluster 275
/cfg/sys/time
followed by:
tzone
Specifies the time zone. You are prompted
to enter a continent or ocean area, a country,
and a region (if applicable). To view available
input options, press Enter to accept the default
(
select) in order to display selection menus
for each item.
ntp
Accesses the NTP Servers menu, in order to
manage NTP servers used by the cluster (see
“Managing NTP servers” (page 275)).
Managing NTP servers
You can add NTP servers to the system configuration to enable the NTP
client on the Nortel SNAS to synchronize its clock. To compensate for
discrepancies, it is recommended that NTP have access to at least three
NTP servers.
To manage NTP servers used by the system, use the following command:
/cfg/sys/time/ntp
The NTP Servers menu appears.
The NTP Servers menu includes the following options:
/cfg/sys/time/ntp
followed by:
list
IP address information for all NTP servers
configured for the system, by index number.
del <index number>
Removes the specified NTP server from the
system configuration.
• index number is the identification number
automatically assigned to the server when
you added the server to the configuration.
To view the index numbers of all configured
NTP servers, use the list command.
add <IPaddr>
Adds an NTP server to the system
configuration.
• IPaddr is the IP address of the NTP
server.
An index number is automatically assigned to
the server.
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100 03.01 Standard
28 July 2008
Copyright © 2007, 2008 Nortel Networks
.