Filter
Top Products
86 Configuring the domain
Use existing certificate (no/1) [no]:
Create a test certificate? (yes/no): no
Enter server certificate.
Paste the certificate and key, press Enter to create a
new line, and then type "..." (without the quotation
marks) to terminate.
>
7 To create a test certificate:
a At the prompt to create a test certificate, enter Yes.
b When prompted, enter the required certificate information.
For more information, see “Generating and submitting a CSR”
(page 305).
c To continue, go to Step 8.
Use existing certificate (no/1) [no]:
Create a test certificate? (yes/no): yes
The combined length of the following parameters may not
exceed 225 bytes.
Country Name (2 letter code):
State or Province Name (full name):
Locality Name (eg, city):
Organization Name (eg, company):
Organizational Unit Name (eg, section):
Common Name (eg, your name or your server’s hostname):
Email Address:
Subject alternative name (blank or comma separated
list of URI:<uri>, DNS:<fqdn>, IP:<ip-address>,
email:<email-address>):
Valid for days [365]:
Key size (512/1024/2048/4096) [1024]:
8 Specify whether the SSL server uses chain certificates.
Do you require chain certificates (yes/no) [no]:
9 If you want to enable HTTP to HTTPS redirection, create a
redirect server.
Do you want an http to https redirect server (yes/no)
[no]:
10 Specify whether you want to add a network access devices to
the domain.
Do you want to configure a switch? (yes/no) [no]:
If you do want to add a network access devices, enter yes to
launch the quick switch wizard. Go to step 11.
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100 03.01 Standard
28 July 2008
Copyright © 2007, 2008 Nortel Networks
.