Filter
Top Products
Configuring SNMP 325
Command
Parameter
privpasswd <password>
del
/cfg/sys/adm/snmp/target <target ID> ip <IPaddr>
port <port>
version v1 | v2c | v3
del
/cfg/sys/adm/snmp/event addmonitor [<options>] -b <name>
<OID> <op> <value>
addmonitor [<options>] -t <name>
<OID> <value and event>
addmonitor [<options>] -x <name>
<OID> [present|absent|changed]
delmonitor <name>
addevent [-c <comment>] <name>
<notification> [<OID...>]
delevent <name>
list
Configuring SNMP settings
To configure SNMP management of the Nortel SNAS cluster, use the
following command:
/cfg/sys/adm/snmp
The SNMP menu appears.
The SNMP menu includes the following options:
/cfg/sys/adm/snmp
followed by:
ena
Enables network management using
SNMP. The default is enabled.
dis
Disables network management using
SNMP.
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100 03.01 Standard
28 July 2008
Copyright © 2007, 2008 Nortel Networks
.