Filter
Top Products
Configuring SNMP 333
The event menu includes the following options:
/cfg/sys/adm/snmp/event
followed by:
addmonitor [ <options> ] -b
<name> <OID> <op> <value>
Adds a boolean monitor and trigger as
defined in the DISMAN-EVENT-MIB.
Valid <options> are:
•
-c <comment>—adds a comment
•
-f <frequency>—the sampling
interval, in seconds. The default is 600
(10 minutes).
• -o <OID>—additional objects to send
in the event
• -e <EventName>—the name of a
notification event
• -d <OID>—the delta discontinuity OID
• -D timeTicks|timeStamp|dateAnd
Time—the delta discontinuity type
Other parameters are:
•
name—a unique name you assign to
the monitor, for identification
•
OID—the object identifier (or symbolic
name) to monitor
•
op—the operator. Valid options are:
!= (not equals), == (equals), <= (less
than or equal to), >= (greater than or
equal to), < (less than), > (greater than)
• value—an integer indicating the value
against which the operation will be
performed
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100 03.01 Standard
28 July 2008
Copyright © 2007, 2008 Nortel Networks
.