Filter
Top Products
Configuring authentication 185
To manage the RADIUS servers used for client authentication in the
domain, use the following command:
/cfg/doamin #/aaa/auth #/radius/servers
The Radius servers menu appears.
The Radius servers menu includes the following options:
Table 35
RADIUS authenticaion servers
/cfg/doamin #/aaa/auth #/radius/servers
followed by:
list
Lists the IP address, port, and shared secret
of currently configured RADIUS authentication
servers, by index number.
del <index number> Removes the specified RADIUS authentication
server from the current configuration. The
index numbers of the remaining entries adjust
accordingly.
To view the index numbers of all configured
RADIUS authentication servers, use the list
command.
add <IPaddr> <port>
<shared secret>
Adds a RADIUS authentication server to the
configuration. You are prompted to enter the
following information:
• IPaddr—the IP address of the
authentication server
•
port—the TCP port number used for
RADIUS authentication. The default is
1813.
• shared secret—the password used
to authenticate the Nortel SNAS to the
authentication server
The system automatically assigns the next
available index number to the server.
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100 03.01 Standard
28 July 2008
Copyright © 2007, 2008 Nortel Networks
.