Filter
Top Products
286 Configuring system settings
The SSH Known Host Keys menu includes the following options:
/cfg/sys/adm/sshkeys/knownhosts
followed by:
list
Lists the type and fingerprint of the known SSH
keys for remote hosts, by index number.
del <index number> Removes the specified known host SSH key.
To view the index numbers of all known host
SSH keys, use the list command.
add Allows you to paste in the contents of a key file
you have downloaded from the remote host.
When prompted, paste in the key, then press
Enter. Enter an elllipsis (...) to signal the end
of the key.
Valid formats are as described for the
/cfg/sys/adm/sshkeys/show command
or the native format used by the OpenSSH
implementation.
If the key has a valid format, you will
be prompted for the corresponding host
name or IP address. You can provide a
comma-separated list of names and IP
addresses for the host.
The system automatically assigns the next
available index number to the known host SSH
key.
import <IPaddr> Allows you to import an SSH key from a
remote host.
• IPaddr—the IP address of the remote host
The system automatically assigns the next
available index number to the known host SSH
key.
Configuring RADIUS auditing
You can configure the Nortel SNAS cluster to include a RADIUS server to
receive log messages about commands executed in the CLI or the SREM,
for audit purposes.
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100 03.01 Standard
28 July 2008
Copyright © 2007, 2008 Nortel Networks
.