Filter
Top Products
Select the server certificate 137
/cfg/domain/radius/eapmethods
followed by:
del <index number> Removes the specified EAP method from the
current configuration. The index numbers of
the remaining entries adjust accordingly.
•
index number—is the identification
number automatically assigned to the EAP
method, when you added the EAPmethod
to the configuration.
add <method type>
<module name>
Adds a EAP method to the configuration.
• method type—Specify the method type.
•
module name—is a string that must be
unique. The maximum allowable length
of the string is 255 characters, but Nortel
recommends a maximum of 32 characters.
Specify the module name.
insert <index number>
<method type> <module
name>
Inserts a EAP method at a particular position
in the list.
•
index number—is the identification
number automatically assigned to the EAP
method,when you added the method to the
configuration. Specify the index number.
• method type—Specify the method type.
• method name—is a string that must be
unique in the domain. The maximum
allowable length of the string is 255
characters, but Nortel recommends a
maximum of 32 characters. Specify the
module name.
move <index number>
<destination index>
Moves a EAP Method up or down the list .
• index number—the original index number
of the EAP Methods.
• destination index—the index number
representing the new position of the EAP
method in the lists.
Select the server certificate
Select the server certificate from the list, use the following command:
/cfg/domain/radius/cert
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100 03.01 Standard
28 July 2008
Copyright © 2007, 2008 Nortel Networks
.