Filter
Top Products
194 Configuring authentication
The LDAP servers menu includes the following options:
Table 38
Managing LDAP authentication servers
/cfg/doamin #/aaa/auth #/ldap/servers
followed by:
list
Lists the IP address and port of currently
configured LDAP servers, by index number.
del <index number>
Removes the specified LDAP server from the
current configuration. The index numbers of
the remaining entries adjust accordingly.
To view the index numbers of all configured
LDAP servers, use the list command.
add <IPaddr> <port>
Adds an LDAP server to the configuration.
You are prompted to enter the following
information:
• IPaddr—the IP address of the
authentication server
•
port—the TCP port number used for
LDAP authentication. The default is 389.
The system automatically assigns the next
available index number to the server.
ATTENTION
The default TCP port number used by the
LDAP protocol is 389. If LDAPS is enabled,
change the port number to 636.
insert <index number>
<IPaddr>
Inserts a server at a particular position in the
list of LDAP servers in the configuration.
• index number—the index number you
want the server to have
• IPaddr—the IP address of the server you
are adding
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100 03.01 Standard
28 July 2008
Copyright © 2007, 2008 Nortel Networks
.