Filter
Top Products
288 Configuring system settings
Step Action
1 In the RADIUS server dictionary, define a descriptive string (for
example, NSNAS-SSL-Audit-Trail).
2 Map this string to the Vendor-Type value.
--End--
Configuring RADIUS auditing
To configure the Nortel SNAS to support RADIUS auditing, use the
following command:
/cfg/sys/adm/audit
The Audit menu appears.
The Audit menu includes the following options:
/cfg/sys/adm/audit
followed by:
servers
Accesses the RADIUS Audit Servers menu,
in order to configure external RADIUS audit
servers for the cluster (see “Managing RADIUS
audit servers” (page 289)).
vendorid
Corresponds to the vendor-specific attribute
used by the RADIUS audit server to identify
event log information from the Nortel SNAS
cluster.
The default Vendor-Id is 1872 (Alteon).
vendortype
Corresponds to the Vendor-Type value used
in combination with the Vendor-Id to identify
event log information from the Nortel SNAS
cluster.
The default Vendor-Type value is 2
(Alteon-ASA-Audit-Trail).
ena
Enables RADIUS auditing.
The default is disabled.
dis
Disables RADIUS auditing.
The default is disabled.
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100 03.01 Standard
28 July 2008
Copyright © 2007, 2008 Nortel Networks
.