Filter
Top Products
Customizing the portal and logon 251
/cfg/doamin #/portal/content
followed by:
export <protocol> <server>
<filename>
Exports a content file (in ZIP format)
from the portal to the specified
TFTP/FTP/SCP/SFTP file exchange
server.
• protocol is the export protocol.
Options are tftp|ftp|scp|sftp.
•
server is the host name or IP address
of the server
• filename is the name of the content
file (.zip)
delete
Deletes all uploaded content from the
portal.
available
Shows remaining memory space available
for custom content, in kilobytes (KB).
ena
Enables client access to custom content.
The default is disabled.
dis
Disables client access to custom content.
Configuring linksets
A linkset is a set of links that display on the portal Home tab. For more
information about linksets and links, see “Linksets and links” (page 234).
To create and configure a linkset, use the following command:
/cfg/doamin #/linkset <linkset ID>
where
linkset ID is an integer in the range 1 to 1024 that
uniquely identifies the linkset in the Nortel
SNAS domain.
ATTENTION
If you ran the quick setup wizard during initial setup, two linksets have been
created: nha_passed (linkset ID = 1) and nha_failed (linkset ID = 2). The
linksets are empty.
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100 03.01 Standard
28 July 2008
Copyright © 2007, 2008 Nortel Networks
.