Filter
Top Products
Configuring the domain 111
When the user session terminates, the Nortel SNAS sends an accounting
request stop packet to the accounting server. The stop packet contains the
following information:
• session ID
• session time
• cause of termination
Configure the RADIUS server in accordance with the recommendations in
RFC 2866.
Certain Nortel SNAS -specific attributes are sent to the RADIUS server
when you enable accounting (see “Configuring Nortel SNAS -specific
attributes” (page 114)). In conjunction with custom plugins on RADIUS,
these attributes can be used for more detailed monitoring of Nortel SNAS
activity.
When you add an external RADIUS accounting server to the configuration,
the server is automatically assigned an index number. Nortel SNAS
accounting will be performed by an available server with the lowest index
number. You can control accounting server usage by reassigning index
numbers (see “Managing RADIUS accounting servers” (page 112)).
To configure the Nortel SNAS to support RADIUS accounting, use the
following command:
/cfg/domain #/aaa/radacct
The Radius Accounting menu appears.
The Radius Accounting menu includes the following options:
Table 13
Configuring RADIUS accounting
/cfg/domain #/aaa/radacct
followed by:
servers
Accesses the Radius Accounting Servers
menu, in order to configure external RADIUS
accounting servers for the domain (see
“Managing RADIUS accounting servers” (page
112)).
domainattr
Accesses the Domain Attribute menu, in
order to configure Nortel SNAS -specific
attributes to be sent to the accounting server
(see “Configuring Nortel SNAS -specific
attributes” (page 114)).
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100 03.01 Standard
28 July 2008
Copyright © 2007, 2008 Nortel Networks
.