Filter
Top Products
120 Remote connection configuration using the NNCLI
web-server enable
2 Configure the access password by using the following command:
web-server password <ro> <username> <passwd>
--End--
Variable definitions
Use the data in the following table to use the web-server command.
Variable Value
def-display-rows
Sets web server default
display row width.
enable
Enables the Web
interface.
help-tftp
Sets web server HTML
directories.
http-port
Sets web server HTTP
port.
password
Sets web server
password.
Configuring the remote host logon
Configure the remote host logon to modify parameters for FTP and TFTP
access. Use the default parameters for TFTP transfers. If you want to
use FTP as the transfer mechanism, you must change the password to a
valid value.
Prerequisites
• You must log on to the Global Configuration mode in the NNCLI.
Procedure steps
Step Action
1 Define conditions for the remote host logon by using the
following command:
boot config host
2 Save the changed configuration to the boot.cfg and pcmboot.cfg
files.
Nortel Ethernet Routing Switch 8600
Commissioning
NN46205-319 01.01 Standard
30 May 2008
Copyright © 2008 Nortel Networks
.