Filter
Top Products
Configuring system identification 61
Variable Value
location <location>
Changes the system location.
max-vlan-resource-reservation
<enable|disable>
Enables MAX-VLAN feature.
mgmt-virtual-ip <ipaddr/mask>
Configures mgmt virtual
IP.ipaddr/mask is the IP address
and network mask {a.b.c.d/x |
a.b.c.d/x.x.x.x | default}.
mgmt-virtual-ipv6 <ipv6addr/pr
efix-len>
Configures mgmt virtual
IPV6.ipv6addr/prefix-len
is the IPV6 address. The string
length ranges from 0 to 46.
mroute-stream-limit
<enable|disable>
Global mroute stream limit
configuration.enable|disable
enables or disables mroute stream
limit.
mtu <bytes>
Sets MTU (with CRC) to one of three
values: 1522, 1950 and 9600 bytes.
is the MTU value in the range of
1522 to 9600.
multicast-resource-reservatio
n <value>
Reserves MGIDs for IPMC
use.value is the number of MGIDs
reserved for IPMC use in the range
from 64 to 4083.
name <prompt>
Changes the system name. prompt
is the box or root level prompt . The
string length ranges from 0 to 255.
portlock <on|off>
Turns portlock on/off.
sendAuthenticationTrap
<true|false>
Sets authentication trap to true or
false.
smlt-on-single-cp <enable|disa
ble> [timer <value> ]
Enables SMLT on Single CP feature.
•
enable|disable Enables
or disable SMLT on single CP
feature.
• [timer <value> ] is the timer
value for SMLT on single CP
feature timer in the range of 1 to
3.
topology <on|off>
Turns topology on/off.
udp-checksum <enable|disable>
Enables or disables UDP Checksum
calculation.
Nortel Ethernet Routing Switch 8600
Commissioning
NN46205-319 01.01 Standard
30 May 2008
Copyright © 2008 Nortel Networks
.