Filter
Top Products
127
.
Common procedures using Device
Manager
The following section describes common procedures you use while
commissioning the Nortel Ethernet Routing Switch 8600.
Common procedure navigation
•
“Saving the configuration” (page 127)
Saving the configuration
After you change the boot configuration, you must save the changes
to both the master and the standby management modules. Save the
configuration to a file to retain the configuration settings.
Procedure steps
Step Action
1 From the main Device Manager window, select Actions, Save
Boot Config to save the boot configuration.
2 From the main Device Manager window, select Actions, Save
Runtime Config to save the current configuration.
--End--
Nortel Ethernet Routing Switch 8600
Commissioning
NN46205-319 01.01 Standard
30 May 2008
Copyright © 2008 Nortel Networks
.