Filter
Top Products
22 Commissioning fundamentals
the switch reboots in the desired operating mode. The setup utility also
provides error and warning messages to advise you of the ramifications of
certain hardware and software configurations.
For information about the supported operating modes, see Nortel Ethernet
Routing Switch 8600 Administration, NN46205-605.
The setup utility prompts you through the configuration process by asking
a series of questions. Answer each question or accept the default by
pressing Enter. Each question shows the default in brackets ([ ]) and the
acceptable parameter options in parenthesis.
After you run the setup utility, reboot the switch.
The following figures show sample output from the setup utility. This
example uses the default values.
Nortel Ethernet Routing Switch 8600
Commissioning
NN46205-319 01.01 Standard
30 May 2008
Copyright © 2008 Nortel Networks
.