Filter
Top Products
Configuring the switch with the setup utility 59
Table 9
Job aid: Setup utility prompt descriptions (cont’d.)
Prompt Description and action
First net mgmt route
[0.0.0.0:0.0.0.0]:
Description: Specifies the IP address of
the first network management route (static
route from the network management port to a
device in the network).
Action: Type the network and gateway IP
address of the first network management
route.
Second net mgmt route
[0.0.0.0:0.0.0.0]:
Description: Specifies the IP address of the
second network management route.
Action: Type the IP address of the second
network management route (static route from
the network management port to a device in
the network).
Third net mgmt route
[0.0.0.0:0.0.0.0]:
Description: Specifies the IP address of the
third network management route.
Action: Type the IP address of the third
network management route (static route from
the network management port to a device in
the network).
Fourth net mgmt route
[0.0.0.0:0.0.0.0]:
Description: Specifies the IP address of the
fourth network management route.
Action: Type an IP address of the fourth
network management route (static route from
the network management port to a device in
the network).
IP address of the default VLAN
[0.0.0.0/0.0.0.0]:
Description: Specifies the IP address of the
default Virtual Local Area Network (VLAN).
Action: Type the IP address of the default
VLAN.
Do you want to save the
changes
[Saving the parameters
updates the files /flash/boot.cfg
and /flash/dvmrp_pol.cfg]
(y/n)?
Description: Saves your changes to the boot
and run-time configuration files.
Action: Enter y to save the boot and run-time
configuration files. Enter n if you do not want
to save your changes.
Nortel Ethernet Routing Switch 8600
Commissioning
NN46205-319 01.01 Standard
30 May 2008
Copyright © 2008 Nortel Networks
.