Filter
Top Products
72 Initial steps using the NNCLI
Table 10
Job aid: Roadmap of initial NNCLI commands (cont’d.)
Command
Parameter
8databits
baud <rate>
mode <ascii|slip|ppp>
mtu <bytes>
my-ip <ipaddr>
peer-ip <ipaddr>
pppfile <file>
restart
slip-compression
boot config sio modem
slip-rx-compression
dst-end <Mm.n.d/hhmm|MMddhhmm>
dst-name <dstname>
dst-offset <minutes>
dst-start <Mm.n.d/hhmm|MMddhhmm>
name <tz>
boot config tz
offset-from-utc <minutes>
cli password <word> <access-level>
access-level <word>
aging-time day <1-365>
default-lockout-time
<60-65000>
lockout <word> time <time>
min-passwd-len <10-20>
password
password-history <3-32>
snmp-server contact <word>
agent-conformance enable
authentication-trap enable min-secure|semi
-secure|very-secure
Nortel Ethernet Routing Switch 8600
Commissioning
NN46205-319 01.01 Standard
30 May 2008
Copyright © 2008 Nortel Networks
.