Filter
Top Products
94 Initial steps using the NNCLI
Variable Value
default-lockout-time
<60-65000>
Changes the default lockout time after
three invalid attempts. Configures the
lockout time, in seconds, and is in the
60–65000 range. The default is 60
seconds.
To configure this option to the default
value, use the default operator with
the command.
lockout <word> time <time>
Configures the host lockout time.
•
word is the host IP address in the
format a.b.c.d.
• time is the lockout-out time, in
seconds, in the 60–65000 range.
The default is 60 seconds.
min-passwd-len <10-20>
Configures the minimum length for
passwords in high-secure mode.
To configure this option to the default
value, use the default operator with
the command.
password-history <3-32>
Specifies the number of previous
passwords the switch stores. You
cannot reuse a password that is stored
in the password history. The default is
3.
To configure this option to the default
value, use the default operator with
the command.
Nortel Ethernet Routing Switch 8600
Commissioning
NN46205-319 01.01 Standard
30 May 2008
Copyright © 2008 Nortel Networks
.