Filter
Top Products
88 Initial steps using the NNCLI
Variable Value
authentication-trap
Enables or disables generation of
authentication traps.
bootstrap
Sets SNMP initial user entry.
community
Sets community table.
contact <word>
Identifies the contact person who manages
the node. To include blank spaces in the
contact, use quotation marks (") around
the text. Use the no operator to remove
this configuration. To configure this option
to the default value, use the default
operator with the command. The default is
support@nortelnetworks.com.
force-iphdr-sender
Sets same SNMP and IP sender flag.
force-trap-sender
Sets SNMP trap sender IP.
group
Sets SNMP v3 group access table.
host
Specifies hosts to receive SNMP
notifications.
location <word>
Identifies the physical location of the
node. To include blank spaces in the
location, use quotation marks (") around
the text. Use the no operator to remove
this configuration. To configure this option
to the default value, use the default
operator with the command. The default is
a Nortel address.
log
Specifies the SNMP log feature.
name <word>
Configures the system or root level
prompt name for the switch. word is an
ASCII string from 1 to 255 characters (for
example, LabSC7 or Closet4).
notify-filter
Creates new entry for notify filter table.
sender-ip
Sets SNMP trap sender IP.
user
Creates or modifies SNMPv3 user.
view
Creates or modifies an SNMP access
view.
Nortel Ethernet Routing Switch 8600
Commissioning
NN46205-319 01.01 Standard
30 May 2008
Copyright © 2008 Nortel Networks
.