English
42 Advanced Operations
display shows BROADCAST/MEMORY TX press No
ᮣ
key, display will show FEEDER TX.
10 Select a location. Refer to the following instructions.
To Select Using Do This
A One Touch key Press the One Touch key.
An Auto Dial number Press the Auto Dial key, then enter the
two digit Auto Dial number on the
numeric keypad.
A number dialed on Dial as you would on a normal telephone.
the numeric keypad
11 Press the Start key. Your fax machine will begin
waiting for the time and date you have set before
sending the fax.
Sending a Delayed Fax From Memory
1 Load your documents.
2 Press the Select Function key.
3 Press the 1/Delayed TX One Touch key. The
display will show DELAYED TX and today’s date.
4 If the transmission is to occur today, press the Yes
ᮤ
key and go to step 7. If the transmission is to
occur at a later date, press the No
ᮣ
key.
5 Using the numeric keypad, enter the date on
which you wish the transmission to begin.
6 Press the Yes
ᮤ
key.
The display will show PRG. START TIME.
7 Using the numeric keypad, enter the time on
which you wish the transmission to begin.
Tip:
Be sure to enter the time using a 24-hour clock
(i.e., 8:00 a.m. would be entered as 08:00, and 8:00
p.m. would be entered as 20:00).
8 Press the Yes
ᮤ
key and the display will show
BROADCAST/MEMORY TX or FEEDER TX depend-
ing on the User Function 18 setting.
9 If the display shows BROADCAST/MEMORY TX go to
step 10. If the display shows FEEDER TX press No
ᮣ
key, display will show BROADCAST/MEMORY TX.
10 Select a location. Refer to the instructions below.
To Select Using Do This
A One Touch key Press the One Touch key.
An Auto Dial number Press the Auto Dial key, then enter the
two digit Auto Dial number on the
numeric keypad.
A number dialed on Dial as you would on a normal telephone.
the numeric keypad
11 Press the Yes
ᮤ
key to confirm your selection. The
display will show SELECT LOCATION(S).
12 Repeat Steps 10 and 11 as often as necessary to
continue selecting locations.
4100 Fax ENGLISH 15/1/97 9:37 am Page 42