Filter
Top Products
English
50 Programming
20 ECM FUNCTION: The error correction mode
function helps your fax machine to improve commu-
nication in areas where telephone line conditions are
poor. Available settings are on and off.
21 REMOTE DIAGNOSIS: The remote diagnostics
feature allows a service person to remotely dial and
service your fax machine. Available settings are on
and off.
22 PC/FAX SWITCH: If the PC Interface option is
installed, your fax machine automatically transfers
received faxes directly to the PC (and does not receive
and print them itself). However, if there is a problem
with the PC interface option and this function is set to
ON, then the fax machine will automatically receive
and print any messages. If this function is set to OFF
there will be no reception.
23 ONE TOUCH PARAM: This function allows you
to make changes to the communications settings for
a specific One Touch key, without changing the
normal communication settings used by your fax
machine. For instructions on changing One Touch
Parameters settings for a One Touch key, see One
Touch Parameters in the Dial Directories chapter.
Changing Your User Function Settings
1 Press the Select Function key.
2 Press the 9/User Program One Touch key.
The display will show 1:FUNC. PROGRAMMING.
3 Press the Yes
ᮤ
key. The display will show
FUNCTION NO. [ ].
4 Using the numeric keypad, enter the 2-digit number
of the function you want to change. This display
will show the name of the selected function.
5 Repeatedly press the No
ᮣ
key until the setting
you want appears in the display.
Tip: If you are changing your fax machine’s TX MODE
DEFAULT settings, the new settings will appear on the
LEDs above the Transmit Resolution/Yes
ᮤ
and the
Type of Original/No
ᮣ
keys
6 Press the Yes
ᮤ
key to confirm your selection. The
name of the next function setting will appear in the
display.
7 Press the Select Function key to finish.
4100 Fax ENGLISH 15/1/97 9:37 am Page 50