Filter
Top Products
Dial Parameter Settings
These functions allow you to control the way your
fax machine dials telephone numbers. Refer to Dial
Parameter Settings List to determine which settings
you may need to change, then refer to Changing
Your Dial Parameter Settings to make the change.
Tip: Some settings are not available in some countries.
If you have trouble accessing a dial parameter setting
listed here, contact your dealer for assistance.
Dial Parameter Settings List
REDIAL TRIES: This function controls how many
times your fax machine will automatically redial a
number which is busy or which does not answer.
Available settings are from 0 to 10 tries.
REDIAL INTERVAL:
The function controls how long
your fax machine waits between each automatic redi-
al attempt. Available settings are from 1 to 6 minutes.
DIAL TONE DETECT:
This function allows your fax
machine to wait for and detect a dial tone before pro-
ceeding with dialling. Available settings are on and
off.
BUSY TONE DETECT: This function allows your
fax machine to detect a busy tone when sending a
fax. Available settings are on and off.
MF(TONE)/DP(PULSE): This function controls
what method your fax machine uses for dialling.
Two dialling methods are in common use. DP, or
dial pulse dialling, uses monotone pulses to dial a
number (like a rotary telephone). MF, or multi-fre-
quency dialling (touch tone), uses different tones
to dial a number. Available settings are MF and DP.
PULSE DIAL RATE: If your fax machine is set to
pulse dialling, this function controls how quickly
your fax machine sends our dialling pulses (the dial
pulse rate varies in different countries). Available
settings are 10 pps, 16 pps and 20 pps.
PULSE MAKE RATIO: Available settings are 33%
and 39%.
PULSE DIAL TYPE: If your fax machine is set to
pulse dialling, this function controls the type of
pulse dialling used (different types of pulse dialling
are used in different countries). Available settings
are N, 10-N and N+1.
MF(TONE) DURATION: If your fax machine is set
to tone dialling, this function controls the duration
of the tones used for dialling (the tone duration
varies in different countries). Available settings are
75 ms, 85 ms, and 100 ms.
English
Programming 51
4100 Fax ENGLISH 15/1/97 9:37 am Page 51