Filter
Top Products
English
Programming 49
11 RING RESPONSE:
This function controls how
long your fax machine waits before answering an
incoming telephone call. The available settings are 1
ring, 5 seconds, 10 seconds, 15 seconds or 20 seconds.
The recommended setting for Tel/Fax mode is 1 ring.
12 DISTINCTIVE RING:
This function is intended for
use only in certain countries outside Europe. The default
setting is off, and should not be changed.
13 1’ST PAPER SIZE: This function allows you to
tell your fax machine what size of paper you are
using in your fax machine’s paper tray. Available
settings are A4, letter, legal 13 and legal 14.
15 USER LANGUAGE: This function allows you to
switch between the two languages programmed into
your fax machine.
16 INCOMING RING: This function controls the
telephone ringing sound your fax machine makes
when a call comes in. When this function is set to
off, your fax machine will not ring during incoming
calls. When set to on, your fax machine will only
ring when set to manual receive mode or RING
RESPONSE is set to 5-20 seconds (except 1 ring).
When set to DRC, your fax machine will ring for
each incoming call with the same tone. Available set-
tings are on, off and DRC.
17 REMOTE RECEIVE: You may have manually
answered and incoming call and had a conversation,
and then wish to receive a fax message from the
other party before hanging up. Or, you may have
picked up the telephone and heard a remote fax
machine’s short beep every 3 seconds. This function
enables you to activate your fax receive function
using your telephone dial pad or the optional tele-
phone handset. Using this feature you may press a
single key twice on the telephone or handset key
pad to start receiving. Available settings are off, 00,
11, 22, 33, 44, 55, 66, 77, 88, 99, ** AND ##.
18 MEM./FEEDER SW.: This function controls how
your fax machine normally transmits fax messages
(by scanning the document into memory first, or
by transmitting directly from the document feeder).
Available settings are memory and feeder.
19 POWER SAVE MODE: This function substantial-
ly reduces the amount of power your fax machine
consumes when it is not in use. When this function
is on, your fax machine will automatically switch
to power save mode after it has been idle for three
minutes. When this occurs, your display will show:
POWER SAVE MODE, PRESS“START” TO EXIT.
While in this mode, your fax machine will automati-
cally switch back to full operation after you press
the Start key, when the telephone rings, when the
telephone handset is lifted, or when a document is
loaded. Available settings are on and off.
4100 Fax ENGLISH 15/1/97 9:37 am Page 49