Filter
Top Products
C9300/C9500 Setting up • 52
USB
PS-PROTOCOL
ASCII
RAW
Specifies PostScript (PS)
communication protocol mode
of data from USB. (In RAW
mode, Ctrl-T is invalid.)
NETWORK
PS PROTOCOL
ASCII
RAW
Specifies PS communication
protocol mode of data from
OkiLAN 6200e Plus.
(In RAW mode, Ctrl-T is invalid.)
CLEARABLE
WARNING
ON; Job
PCL emulation: Sets the time
before deleting error messages.
If On, press Error Delete switch
to display error. If Job, error
remains displayed until next
print job is received.
PS emulation: Error messages
are only shown during job
regardless of setting.
AUTO
CONTINUE
On; Off Sets the printer to recover
automatically after a memory
overflow or print overrun.
MANUAL
TIMEOUT
60 sec; 30 sec; Off Sets the time between
requesting that paper is inserted
and when the print job is
cancelled should paper not be
inserted.
Only works in PostScript mode.
WAIT TIMEOUT
Off; 5 sec to 300
sec; default = 40
sec
Sets the time between receiving
the last byte of data and the
page being automatically
ejected.
Only works in PCL mode.
In PS mode the job will be
cancelled.
LOW TONER
Continue; Stop If set to CONTINUE, allows
printing to continue when Low
toner is displayed. If STOP is
selected - when Low toner is
displayed, the printer goes off
line.
System configuration menu (continued)
The default settings are bold.
Item Value Description