Filter
Top Products
C9300/C9500 Setting up • 54
PCL emulation
The default settings are bold.
Item Value Description
FONT SOURCE
Resident; DIMM0;
Downloaded
Selects location of the PCL
font used.
DIMM0 is displayed only when
font DIMM ROM exists in the
slot.
Downloaded
only appears if
fonts have been downloaded
to the printer.
FONT NO.
I000, C001, S001 Sets the PCL font number.
I = internal (resident font);
I000 = Courier.
C = Font stored in the printer's
Flash memory.
S = downloaded soft font,
stored on the printer's internal
hard disk drive. Applies only to
printers with a hard disk drive
installed.
FONT PITCH
0.44 cpi to 99.99 cpi in
0.01 cpi increments
Default = 10.00 cpi
Sets the font width in
characters per inch. Only
displayed if the font is a fixed
spacing outline font.
FONT HEIGHT
4.00 to 999.75 point, in
0.25 point increments
Default = 12.00 point
Sets the font point size.
Applies only to fixed fonts
(does not apply to proportional
fonts).