Panasonic CF-31 SERIES Laptop User Manual


 
121
Troubleshooting (Advanced)
Smart Card (only for model with Smart Card slot)
Cannot use a Smart Card. Insert the Smart Card correctly.
Set [Smart Card] to [Auto] in the [Advanced] menu of the Setup Utility ( page
95).
To use a Smart Card, you need a specified software and driver.
Fingerprint Reader (only for model with Fingerprint Reader)
The sensor does not enroll or authenti-
cate my fingerprint.
Slide your finger correctly. For further information about enrollment and
authentication, refer to “How to Use the Fingerprint Reader” ( page 58) and
[Fingerprint Tutorial].
Click (Start)
*7
- [All Programs] - [Protector Suite] - [Control Center] - [Help]
- [Tutorial].
The sensor enrolls or authenticates no fingerprint, or performs authentication
poorly, despite the correct way of finger sliding when your finger is in any of the
conditions stated below:
Rough skin, or injured finger (with a cut or a skin inflammation)
•Extremely dry
Soiled with mud or oil
Fingerprint has been worn and has faded
Wet with water or sweat
<You can improve enrolling and authentication sensitivity by taking the
following steps when any of the conditions described above exists>
Wash your hands or wipe them dry.
Use a different finger for registration or authentication.
Treat your finger with a hand cream when it is rough skin or dry.
Clean the fingerprint sensor. For further information, refer to “Handling &
Maintenance” ( page 65).
The fingerprint sensor may be malfunctioning when it continues to perform
poorly after the steps described above have been performed. Contact
Panasonic Technical Support.