Filter
Top Products
Printer Installation Setting Up the DP-C106
1-19
Printer Installation
Perform this procedure after the Printer is unpacked, and placed in a suitable
location.
If you are installing the 10 Bin Sorter, skip step 1 and go to step 2.
1. Locate the Output Tray in the cardboard tray removed from the top of
the printer. Install the tray by performing steps a through c.
a. Standing on the left-hand side of the Printer, hold the Output Tray
as shown.
Do not place the metal spring into the hole. Ensure that the metal spring
extends down against the outside of the cover.
b. Place the right-hand arm of the tray into the corresponding hole as
shown.