Filter
Top Products
Setting Up the DP-C106 Printing the Test Page
1-68
Making a Test Copy from the Scanner
For a quick overview of the Scanner Control Panel, refer to Getting to Know
the DP-C106 section of the Operating Instructions.
1. Ensure that READY is displayed on the Printer Control Panel Screen.
2. Lift the Scanner Cover and place an original on the Document Glass.
3. Press the Copy button to enter Copy mode.
4. Press the Start button on the Scanner Control Panel.
After a moment the copy is delivered to the Output Tray on the top of the
Printer.
5. Remove the original from the Document Glass.
The Next Step
Perform one of the following steps:
• If you are adding memory to the Printer, go to the Adding Memory to the
Printer procedure.
• If you are adding memory to the Scanner, go to the Adding Memory to
the Scanner procedure.
• If you are not adding memory, go to Getting to Know the DP-C106
section of the Operating Instructions.
Copy button
Start button