Filter
Top Products
Setting Up the DP-C106 Adding Memory to the Printer
1-70
3. Slide the panel to the rear and lift to remove. The memory card slots are
located behind the panel.
• The upper slot contains the 64MB memory card, already installed
• The lower slot is empty.
4. If you are replacing the 64MB memory card with one or two memory
cards, go to step 6. If you are adding another memory card to the
existing 64MB memory, perform step 5.
5. Remove the additional Memory Card from the anti-static bag.
a. Separate the clips and slide the card into the lower slot below the
64MB memory card.
b. Using your thumbs, press the card into the slot until it clicks.
0
3
0
1
0
63A
-
WOL
c. Go to step 7.