Filter
Top Products
Setting Up the DP-C106 Installing the Duplex Unit/Kit
1-30
b. Using a screwdriver, remove the two screws from lower left-hand
cover of the Printer as shown below.
c. Remove the cover by shifting it to the front of the Printer then
pulling it away from the Printer. Discard the cover.
d. Close the Duplex Tray and Paper Tray 1.
8. Using the Special Tool from the contents of the Printer carton, remove
the two Fuser Tray Caps (Plain) from the left-hand side of the Printer.
Discard the two covers.